IndiaBizClub Login

x Register Free
x Register Free

Nidhi Enterprises

J

Nidhi Enterprises

Nylon 6

Mumbai



A Quality Product from
Nidhi Enterprises [View Profile]
Mumbai - India

Description :

Nylon Products

Nylon -6
Nylon thermoplastics are defined by their toughness, low coefficient of friction and good abrasion resistance. Using nylon reduces lubrication requirements, eliminates galling, corrosion and pilferage problems, and improves wear resistance and sound dampening characteristics.

Nylon rods are manufactured by the Extrusion Technique and therefore they have excellent physical and Mechanical properties.

Features:
Excellent wear resistance, self lubrication and small coefficient of friction.
Excellent heat resistance and non-inflammability.
Very good impact resistance and toughness.
Very good shock absorbing properties.
Good electrical properties.
Excellent abrasion resistance.
Good dimensional stability.
Very good machnineability.
Anticorrosive.

Applications: Used in Bearings, Cams, Washers, Gears, Grommets, Spindles, Nuts & Bolts, Pulleys etc.















Nylon Rods

Standard Sizes:
Diameter: 3 mm to 300 mm;
Length: 300 mm and 1000 mm
Square Rods: 25 mm sq to 75 mm sq x 300 mm length
We can provide customized (special) sizes on request;


Nylon Sheets

Standard Sizes:
Thickness: 6 mm to 100 mm
Sizes: 300 mm width x 300 mm length
1000 mm width x 1000 mm length

We provide customized (special) sizes on request;


Nylon Tubing

Standard Sizes:
Outer Diameter O.D.: 3 mm to 24 mm;
Inner Diameter I.D.: 1.5 mm to 22 mm;
Wall thickness: 0.5 mm to 1 mm
Length: upto 100 mtrs

We can provide customized (special) sizes on request;


Nylon 6 Typical Properties

Property Unit Value
Density g/cm3 1.12-1.14
Melting Point "C 215-220
Tensile strength kg/cm2 490-750
Elastic Modulus kg/cm2 35,700
Shear Strength kg/cm2 450-650
Hardness (Rockwell) R-Scale 115-120
Coefficient of Linear 2,01,500/-
thermal expansion cm/ "C 0.8X104
Volume Resistivity ohm cm 6.2X1014
Dielectric constant (60 cycles) ------ 4.6
Water absorption at 20oC/65%R.H. % 2.0-3.5
Maximum Usage temperature long term in air "C 80
(over years) in inert gas "C 110
in water "C 100
in oil "C 110
Maximum Usage temperature short term "C 140

The technical information above is for guidance and Nidhi Enterprises assumes no Obligation or Liability whatsoever for the above information or any results obtained with respect to the above information


(Approximate) Weight Chart

Standard Diameter (mm) Standard Dia. (Inch) Weight (Kg) (per 300 mm)
12.5 1/2" --------
16 5/8" ---------
19 3/4" 0.12
22 7/8" 0.15
25 1" 0.20
28 1 1/8" 0.27
32 1 1/4" 0.32
35 1 3/8" 0.38
38 1 1/2" 0.42
42 1 5/8" 0.49
45 1 3/4" 0.56
50 2" 0.73
57 2 1/4" 0.92
65 2 1/2" 1.15
70 2 3/4" 1.34
75 3" 1.64
83 3 1/4" 2.09
90 3 1/2" 2.18




View Complete Catalog





Nidhi Enterprises

? P.T.F.E. Products i.E. Rods, Sheets, Bush, Tubings, Bellows, Envelope gaskets, Pipes, Sealant tape, Flex o Seal, etc of virgin quality, carbon/ glass filled. ? Asbestos Products & Non Asbestos Products, i.E. Jointing (CAF) Sheets, Gland Packings, Asbestos Yarn/ Rope/ Cloth/ Tape, etc. ? Engineering Plastics such as Nylon, Cast Nylon, POlyacetal, Hylum (Fabric and Paper based) UHMW, HDPE, Acrylic, P.V.C., Polypropylene (PP), Polyurethane (PU), and LDPE in form of rods, sheets, bushes, profiles, etc. ? Asbestos Millboard (Thermosil brand) & White/ Black Rubber Insertion Sheet/ Rubber Sheets ? Neoprene, Nitrile, Butyle, Viton, Natural, etc. ? Ready Cut Gaskets made from C.A.F. & Non Asbestos, P.T.F.E. , Rubber Gaskets, Spiral Wound Gaskets, etc. ? All types of Industrial and Engineering Products including Valves, MS Nut Bolts, V-Belts, Transmission conveyers & timing belts, Bearings, tools, safety products, etc.



View Company Profile

Other Matching Products


Cast Nylon

Cast Nylon Products Cast Nylon shapes are available in a wide range of sizes & grades. Their flexibility and performance characteristics have led to Nylons replacing bronze, ....

GLASS FITTING MACHINE

GLASS FITTING MACHINE - ABM-JWT-8125 - With 12 Nylon inserts. ABM-JWT-8126 - With 14 Different Nylon inserts. ABM-JWT-8127 - With 24 Different Nylon inserts. ....

Hammer Nylon

Hammer Nylon, 1.1/4" Face. Hammer Nylon, 1" Face. Hammer Nylon, 1 1/2" Face. ....

GLASS FITTING MACHINES - WITH NYLON DIES

GLASS FITTING MACHINE - Small Machine With 6 Nylon Dies GLASS FITTING MACHINE - With 12 Nylon Dies GLASS FITTING MACHINE - Round Base with 14 Nylon Dies ....

SAFETY LADDER

SAFETY ROPE LADDER - Made of one piece Nylon rope of 10/12 mm with wooden/Aluminium rungs, kept 1 ft. (12") apart with 1 ft. (12") clear distance between two side ropes. To hold th ....

Miniature Level Float Switches- Polypropylene, Nylon, PU

Item Code : JK004 JK Miniature Level Float Switches are use for the monitoring and control of liquid levels in the vessels. These Polypropylene, Nylon, PU float switches are corro ....

Miniature Level Float Switches- Polypropylene, Nylon, PU

Item Code : JK004 JK Miniature Level Float Switches are use for the monitoring and control of liquid levels in the vessels. These Polypropylene, Nylon, PU float switches are corro ....

GLASS FITTING MACHINE

GLASS FITTING MACHINE - 1) With 12 Nylon Inserts Item code No. JI - GFM - 1001 2) With 14 Different Nylon Inserts Item Code No. JI - GFM - 1002 3) Small Machine with 6 N ....

SUPPER NYLON LEAD10062

Product Name : SUPPER NYLON LEAD Product Code : 10062 Details SUPER SOFT NYLON LEAD WITH SNAPHOOK COLOER:- BLACK,BLUE,YELLOW,GREEN ....

SOFT NYLON LEAD

Product Name : SOFT NYLON LEAD Product Code : 10059 Details SOFT NYLON LEAD WITH PANIC SNAP HOOK COLOR:- BLUE,RED,WHITE,BLACK,GREEN, OR REQUITMENT ....



Business Blog About Us Support Contact Sitemap Privacy Policy Terms & Conditions

© Copyright 2000 - 2017 IndiaBizClub. All rights reserved.