United Cooling Towers
TIMBER COOLING TOWERS [Mumbai]Timber Cooling Towers includes most Conventional method [Natural Draft Cooling Towers] and mechanical type, Induced Draft Counter Flow, Cross Flow Cooling Towers.
Natural Type Cooling Towers are nothing but the water is cooled with natural air traveling and the water is sprayed with the help of Spray nozzles and covered with louvers covers. This method saves the operating cost because it has....
FRP [FIBRE REINFORCED PLASTIC] COOLING TOWERS [Mumbai]FRP Cooling Towersare manufactured with Glass reinforced plastic mostly in wind with standing bottle type and square type models. It is a mechanical type Counter Flow Tower. FRP Cooling tower intakes the air from bottom and discharge the waste heat at the top. Since the water is traveling from top and the air passes from bottom to top, the water droplet have more direct contact time with air. The ....
DRY COOLING TOWERS [Mumbai]This is one of the latest model Cooling Tower. It is specially designed with copper or aluminium finned tube to increase the heat transfer area and these towers are particularly designed for water scarce areas.
Since Dry Cooling Tower is functioning with Air-cooling Technology, there is no need of excess water evaporation or make up is required to operate the cooling Tower. And also, the Proce....
TIMBER COOLING TOWER [Mumbai]Timber Cooling Towers includes most Conventional method [Natural Draft Cooling Towers] and mechanical type, Induced Draft Counter Flow, Cross Flow Cooling Towers.
Natural Type Cooling Towers are nothing but the water is cooled with natural air traveling and the water is sprayed with the help of Spray nozzles and covered with louvers covers. This method saves the operating cost because it has ....
HEAT LESS COMPRESSED AIR DRIERS [Mumbai]These types of Air Driers are designed to take advantage of the natural tendency of desiccants to establish equilibrium with their surroundings and to deliver dry and clean air used for pneumatic instrumentation or critical applications.
The drier consist of two towers with beds of activated alumina absorbent desiccants. The System completes with prefilter, oil filter, after filter and also wit....
REFREGERATED AIR DRIERS [Mumbai]This type of air drier is compact in size and easy principle. Mere Condensation of moisture in air by cooling. The Specialty of this type drier is without purge air loss. Since this type of drier is based on refrigerant principle there will be no question of carry over of desiccant contamination . This should remove all unwanted moisture from compressed air. So we can safe guard all our instrument....
SHELL & TUBE TYPE HEAT EXCHANGERS [Mumbai]These types are classified into fixed & floating type Heat Exchangers. Fixed type Heat Exchangers are used where there are absolutely no chances for inter mixing of two fluids.
In this type, the tube sheets are completely welded to the shell and acted as shell flanges. The Floating has the advantages of removability of tube bundle and access for cleaning both inner and outer side of tubes and....
FINNED TUBE HEAT EXCHANGERS [Mumbai]United Finned Tube Heat Exchangers are a special European technology in which continues wire or strip of fin material is wounded spirally on the tubes and strengthened to withstandard higher internal pressure comparing with radiation type. Finned Heat Exchangers are having more heat transfer area, which is allowed to improve the efficiency.
MATERIALS: Tubes, Tube sheets, shells, Baffles and F....
FIBER CLASS TANK [Mumbai]Fiberglass water tanks are made out of Glass reinforced plastics with various grades of raw materials depends upon the usage. For example the Raw material will be vary for acid storage tanks when comparing with water Storage tanks. Fire proof, acid proof, chemical proof tanks are also available on Request.
Fibreclass Tanks are mainly made on customer request and specification. Fibreclass tanks....
DOMESTIC WATER SOFTNER DIVISION [Mumbai]UNICO DOMESTIC WATER SOFTENING PROCESS
Hard water is converted into Soft Water in the method of ion Exchange process. The hard water is passed through a Sodium based resin column, which absorbs the Calcium, and Magnesium ion from hard water and releases the same amount of Sodium Salts.
REGENERATION
If the above process is continued at one stage, all the Sodium ions in the resin w....