Apidore Arasive Products Pvt Ltd.
PLAIN CUT-OFF WHEELS (TYPE-1) [Mumbai]Plain cut off wheels are cutting wheels without reinforcement. These wheels can be used for most tools room application at speeds which do not exceed 60 m/s APPLICATION: These are non-reinforced wheels. They are suitable for use on fixed machines & for the jobs where side pressure on the face the wheel is minimum. ....
REINFORCED CUT-OFF WHEELS (TYPE-1) [Mumbai]These are fibre glass reinforced cutting wheels and should be mounted on machines designed for their use. These wheels are designed to run at 80 m/s to 100 m/s. Apidor manufactures reinforced products as below: R1 – Reinforcement on one side or in the center. R2 – Reinforced on two sides. R3 – Triple reinforced. RH2 – Both side party reinforced. ....
OFF HAND GRINDING WHEELS (TYPE-1) [Mumbai]These wheels are suitable for off-hand grinding operations like snagging & fettling. They wheels are also called as snagging wheels. These wheels are used for stock removal in Foundries, Welding shop, Metal fabrication, Steel mills, Automobile industries. ....
ECONOMICAL DEPRESSED CENTRE WHEELS [Mumbai]VIJAY depressed centre wheels are economical & value for money proposition. These wheels are durable with fibre glass reinforcements for strength & toughness. Depending on the application the wheels may contain 2 or 2 1/2 reinforcements. They are normally used on portable angle grinders. They should be used where the grinding loads are not very heavy and there is a good control on the operating sp....
STANDARD DEPRESSED CENTER WHEELS [Mumbai]These are fibre glass reinforced & normally have 3 reinforcements. These wheels should normally be used on portable angle grinder. APPLICATION: These are widely used for grinding, grinding of weld bed, cleaning metal surface, cutting-off gates & risers etc. This wheel is extremely common and finds application in all foundries, Welding shops, steel mills, Metal fabrications plants, Ship yards, P....