Sealant Enterprises
QUICK RELEASE COUPLINGS [Pune]Quick release Coupling is a device used for easy, quick & leakproof
connections & diconnections of flexible pipes carrying fluids.It has numerous
advantages over conventional methods.Some of these are mentioned below.
Cost Effective: Zero leakage saves valuable compressed air & precious chemicals.
Very fast changeover reduces down time Sav....
THROUGH (Male Threading Socket) [Pune]This type of Coupling has a very simple valveless mechanism which allows streamlined & smooth flow of the fluid without any notable pressure drop. Hence it is ideally suitable
for high velocity fluids.
Construction :
No valve - Open at both ends
End Connections -H - Hose nipple
M - Male Threads.
F - Female Threads.
Lock Systems - Ball lock or pinlock.<....
SINGLE SHUT OFF HEAVY DUTY (Socket) [Pune]These couplings are specially designed to achieve higher leakproof life by providing more tightness & sealing area.Due
to ultra tightness, these couplings can be used on vacuum
lines.A typical usage is for vacuum cleaning of tableting
cubical in Pharmaceutical industries.
Construction - Identical to single shut off.
Standard sizes - 1/4",3/8" & 1/2" NB.
DOUBLE SHUT OFF SOCKET [Pune]These couplings have automatic shut off valve at both ends ; in socket & plug also. So on disconnection,both socket
& plug are sealed instantly.This type is widely used on
Hydraulic lines carrying oils, water, chemicals & petrolium products.Material & seal are selected to suit the type
of fluid.
Construction-
Valve- Automatic shut off valve in both, socket & plug....
THROUGH(Male Threading Plug) [Pune]This type of Coupling has a very simple valveless mechanism which allows streamlined & smooth flow of the fluid without
any notable pressure drop.Hence it is ideally suitable for
high velocity fluids.
Lock system - Ball lock or pinlock
Standart material - Steel, Stainless steel, Brass, H.D.P.E & P.P
Seals - Nitrile, Vilton, Silicon.Teflon, available....
MANIFOLDS [Pune]Manifolds facilitate multiple connections from single source.They are especially useful where many tools are used alternatingly.Thus they reduce cost of piping. Centralised piping can be set up in any desired location.
Manifolds are available in two types, Hexagonal & Q.Both types are available with a
pressure guage & a drain cock.
Nominal bore of inlet is twice that of o....
DOUBLE SHUT OFF [Pune]These couplings have automatic shut off valve at both ends ; in socket & plug also. So on disconnection,both socket & plug are sealed instantly.This type is widely used on Hydraulic lines carrying oils, water, chemicals & petrolium products.Material & seal are selected to suit the type of fluid.
Valve-Automatic shutt off valce in both, socket and plug.
End connections-F-Female scr....
PIN LOCK SYSTEMS [Pune]Pin lock system is designed as a alternative to ball lock system for typical application. This system facilitates use of only one hand to connect or disconnect & so can be effectively used where the connection points is in a closed or difficult to reach position. This system is also useful for flow of powder & slurry. In ball lock, solid particals can enter locking ball mechanism restricting the m....
SINGLE SHUT OFF HEAVY DUTY (Plug) [Pune]These couplings are specially designed to achieve higher leakproof life by providing more tightness & sealing area.Due to ultra tightness, these couplings can be used on vacuum lines.A typical usage is for vacuum cleaning of tableting cubical in Pharmaceutical industries.
Construction - Identical to single shut off.
Standard sizes - 1/4",3/8" & 1/2" NB.
Available upto ....
CAM LOCK COUPLINGS (Socket) [Pune]Male Threading Socket
Provides easiest way of connection on large diameter pipes gives uniform circular surface sealing. No friction so no seal wear & hence longer life. No hinderance to flow so the pressure drop is minimum. Can be locked to prevent accedental opening.Available in casting & HPC Model.
....
CAM LOCK COUPLINGS (Plugs) [Pune]Male Threading Socket
Provides easiest way of connection on large diameter pipes gives uniform circular surface sealing. No friction so no seal wear & hence longer life. No hinderance to flow so the pressure drop is minimum. Can be locked to prevent accedental opening.Available in casting & HPC Model.
....