Mmc Electric Company Pvt. Ltd.
Micro Series Motors 100 - 150 Watts [Mumbai]These Micro Series Motors from Dynaflux are available in the power requirements is small. Micro Series motors are extremely light & compact and highly efficient. Special care is taken to keep the noise level low this find application in home appliances, fans etc.....
PMDC Foot MTD (TENV) Motor [Mumbai]PMDC (Permanent Magnet Direct Current) Motors are ideally suited for industrial application with high duty cycles. These DC Motors are offered in standard foot and flange mountings. Magnetic Motors are extensively required in TENV & TEFC enclosures depending on their applications....
PMDC Foot MTD (TEFC) Motor [Mumbai]-Externally access for brush inspection and replacement -High starting torque. -Permanently lubricated sealed ball bearings. -Class B Insulation ( Class F is optional ) Solid Construction .....
PMDC Flange MTD (TEFC) Motor [Mumbai]Power :-0.25 HP to 2 HP Speeds :-1000 RPM to 4000 RPM Voltages :-90 VDC to 180 VDC ....
Micro Series Motors (60 - 80 Watts) [Mumbai]Extremely light and compact Low noise level Designed for high duty cycles High Efficient....
Industrial Battery Operated Motors [Mumbai]Industrial Battery Operated Motors are available in operating voltage from 12 V to 48 V.DC. They are ideally suited for battery operated vehicles hydraulic industries. These battery operated motors are designed for broad duty cycles. The oversize brush commutator design ensures better commutation. Such electrical motors are available in geared and ungeared versions.....
Inline Geared Motor(300 Watts) [Mumbai]PMDC Geared Motors are available in various combinations of gearboxes. These geared motors can be supplied with Inline helical or worm gearboxes The gearboxes are extremely rugged in designed, compact with low noise levels. All the gears are hardened & ground for longer service. Such geared motors are available in foot or flange mountings. PMDC geared motor have a TEFC constructions for high ....
Worm Geared Motor (350 Watts) [Mumbai]Power :-40 watts to 1500 watts Speeds :-1 RPM to 400 RPM Voltages :-12 VDC to 180 VDC ....
DC Drives Model SPM - 1 [Mumbai]Base plate mounting type : Module Supply : Single Phase - 220 VAC. For ? HP to 3 HP for Shunt / PMDC motors Remote On/Off facility. Isolated Trip contacts. ....
DC Drives Model SPM - 2 [Mumbai]Base plate mounting type - Module. Supply : Two Phase - 440 VAC. For 1HP to 7.5 HP DC motor. Remote On/Off facility. Tacho Feedback provision. ....
DC Drives Model TDR 100 [Mumbai]DC Drives Model TDR 100 Base plate mounting type-module. Supply : Three Phase - 220 VAC For 5 HP to 25 HP DC motors. In built ‘Phase Fail’ & ‘Phase Reverse’ protection. In built ‘Over Voltage & ’Tacho Fail‘ protection. ....
DC Drives Model PMD 1 [Mumbai]Base plate mounting type - Module. Supply : Single Phase - 220 VAC. For 1/8 HP to 1 HP PMDC Motors only. Remote On/Off facility. ....
DC Drives Model PMD - 2 [Mumbai]Wall mounting type - M.S Enclosure. Supply : Three Phase - 220 VAC. For 1/8 HP to 1 HP PMDC Motors only. Remote On/Off facility. ....
DC Drives Model TDR - 96 [Mumbai]Front Panel mounting type - MS Enclosure. Supply : Single Phase 220 VAC. For 1/8 HP to 1 HP PMDC Motors. Remote On/Off facility Min/Max Speed settings & Fuses at Back. ....
DC Drives Model TDR - 192 (A) [Mumbai]Front Panel Mounting Type - M.S. Enclosure. Supply : Single Phase - 220 VAC. For 1/8 HP to 1 HP for PMDC motors. Remote On/Off facility. With Analog Volt & Current Meters. ....
DC Drives Model TDR - 192 (D) [Mumbai]Front Panel Mounting Type - M.S. Enclosure. Supply : Single Phase - 220 VAC. For 1/8 HP to 1 HP for PMDC/motors. Remote On/Off facility With Digital Speed indicator. ....
DC Drives Model SPD - 1 [Mumbai]Wall Mounting Type - M.S. Enclosure. Supply : Single Phase - 220 VAC. For 1 HP to 3 HP for PMDC/ Shunt Motors. ....
DC Drives Model SPD - 2 [Mumbai]Wall Mounting Type - M.S. Enclosure. Supply : Single Phase - 220 VAC. For 1 HP to 3 HP for PMDC/ Shunt Motors. ....
Armature Winding Machines Model MI - 200 [Mumbai]This machine is ideally suited for production of universal motor armatures like misc. portable tools,pumps auto electric motors etc. The standard machine consist of a adjustable winding head. Any special armature (i.e. skewed) can be accommodated by merely changing the winding head. The number of turns are controlled with a electric preset counter the main drive is a PMDC motor and winding speed....
