Engineering Products Catalog

Flow


OPTIFLUX- NEW TECHNOLOGY IN FLOW MEASUREMENT [Pune]
OPTIFLUX - New technology in flow measurement. Improved measurement performance. Utilizing all optimization potentials in the sensor and converter has led to better and more reliable results even in the most difficult applications, e.g.. Rapid product changes and pH jumps. In conjunction with piston pumps. In pulp and paper applications where special converters were previously needed. Custody tran....




FLOW INTEGRATOR TOTALIZER [Nashik]
Integrator totalizers for flow measurement and totalisation. Electro mechanical or digital totaliser with memory backup. Digital flow rate indication. Electrical or pneumatic input. Square root function. Engineering unit caliberation. ....




AIR FLOW SWITCH [Mumbai]
MULTI-TECH make air flow switches are compact, rugged and reliable. Thse switches are useful to protect air-cooled equipment in case of fan/blower faliure. Simple design facilities ease in monunting. Defferent sizes of paddels are available to suit exact applcation. These switches, with slight modifiation, can be used for sensing as well as counting of components on conveyers. It can be used as li....




WATER FLOW SWITCH [Mumbai]
MTD make indicating type, magnetically actuated flow switches are designed for possetive detection of fluid flow through your equipment. These are suitable for water, kerosine, lubricating oils of low viscosity etc. These are available in 5 sizes i.e. 3/8", 1/2", 3/4", 1"and 11/4" BSP. Flow range covered is from 1 to 150 LPM. Fluid flow in the system is seen through transparent glass tube. ....




SWIVEL FLOW CONTROL VALVE [Mumbai]
These space-saving valves are mounted directly into the cylinder port, without accessories. They can be turned through 360o . To achieve inlet port flow control with single-acting cylinders, the valve is fitted the other way round.....




LAMINAR AIR FLOW WORK STATION [Aurangabad]
  • Technical specification : class of cleanliness :100, as per USA fed std 209 E,
  • Velocity of air at discharge of hepa will be 0.45 mt/sec +/- 20%
  • Noise level near the work station 65dBA or less
  • Light intensity on work surface 1000 lux [min]
  • Vibration level at work surface =/- 2.5 micrometer or less,
  • Power supply 230 AC , 1 ph 50 hz., 3 wire,
  • Material of ....




  • LAMINAR AIR FLOW WORK STATION [Aurangabad]
  • Technical specification : class of cleanliness :100, as per USA fed std 209 E,
  • Velocity of air at discharge of hepa will be 0.45 mt/sec +/- 20%
  • Noise level near the work station 65dBA or less
  • Light intensity on work surface 1000 lux [min]
  • Vibration level at work surface =/- 2.5 micrometer or less,
  • Power supply 230 AC , 1 ph 50 hz., 3 wire,
  • Material of ....




  • LAMINAR AIR FLOW WORK STATION [Aurangabad]
  • Technical specification : class of cleanliness :100, as per USA fed std 209 E,
  • Velocity of air at discharge of hepa will be 0.45 mt/sec +/- 20%
  • Noise level near the work station 65dBA or less
  • Light intensity on work surface 1000 lux [min]
  • Vibration level at work surface =/- 2.5 micrometer or less,
  • Power supply 230 AC , 1 ph 50 hz., 3 wire,
  • Material of ....




  • LAMINAR AIR FLOW WORK STATION [Aurangabad]
  • Technical specification : class of cleanliness :100, as per USA fed std 209 E,
  • Velocity of air at discharge of hepa will be 0.45 mt/sec +/- 20%
  • Noise level near the work station 65dBA or less
  • Light intensity on work surface 1000 lux [min]
  • Vibration level at work surface =/- 2.5 micrometer or less,
  • Power supply 230 AC , 1 ph 50 hz., 3 wire,
  • Material of ....




  • FLOW CONTROL SYSTEM [Pune]
    This is a Closed loop Flow Control System for controling the flow of any fluid....




    Alicat MC Series Mass Flow Controllers [Tucson]
    Alicat Mass Flow Controllers use patented Internally Compensated Laminar technology to provide users with accurate and repeatable mass flow control in a variety of conditions....




    Alicat M Series Mass Flow Meters [Tucson]
    Alicat's M Series Mass Flow Meters operate using Alicat's patented Internally Compensated Laminar technology. Alicat mass flow meters are used in a variety of applications ranging from laboratory to industrial.....




    Magnetic Flow Meter [ Full Bore] SROAT 1000 [Pune]
    Variety of Sizes: DN 10 to DN 350., Variety of combinations: Integral / Remote converter with or without Display. Various compatible Liners & Electrodes. Measurement results independent of variations in viscosity, density, conductivity of flowing media., No moving parts: No maintenance, No obstruction / No Restriction / No Pressure Loss., Wide velocity range of 0.1 m/s to 10 m/s, Excellent Linear....




    Magnetic Flow Meter [ Insertion Type ] SROAT 1000 [Pune]
    Ideal solution for Water Flow Measurements in large diameter pipes, Suitable for 200 mm to 2000 mm diameter pipes, Remote / Integral Converter options. Easy & safe on - line installation / removal because of special gland seal and isolation valve, Economical as compared to Ultrasonic and Accurate as compared to its counterpart in Turbine type. No moving parts; No maintenance. Good Accuracy of meas....




    Air / Gas /Bio Gas / Steam Flow Metering System wi [Pune]
    Various sizes of orifice assemblies with accurate calculations, Anubar assemblies also available, Typical Turndown 10 : 3. For 10 :1 turndown V cone restriction elements are available. Various type of needle valves, gate valve & manifolds with or without IBR approval as per application. On - line density compensation possible because of on - line Pressure & Temperature measurement. Various types o....




    Flow Indicating Totalizer [Pune]
    Accurate Flow reading & Totalization, Typically ? 0.1%Digital or Electromagnetic Counter available [3400 & 3300] Suitable for all types of flow sensors. Linear / Square root options available. Batching operation possible. Specially designed Batch Controllers are available [mcs 3000]. Fully user programmable Microcontroller based version with communication port available [mcs 3000].....




    Axial Flow Fan [Mumbai]
    Multi-Wing Axial Flow Fans....




    Multi-Wing Axial Flow Fans [Mumbai]
    The Multi-Wing system is based on producing high efficiency impellers utilising standard interchangeable components.
    Because Multi-Wing impellers use standard components, they can be custom manufactured to your specific requirements.

    The impeller series is produced so that the number of blades, the material, the pitch angle of the blades as well as the direction of rotation can be varied....




    AXIAL FLOW FANS [Mumbai]
    Through AXIAL FLOW FANS the air or gas flows parallel to the impeller axis i.e. the suction and the discharge are in the same line.
    LAXMI Axial Flow Fans cover a wide range of air quantities and pressures and are suitable for common ventilation and air conditioining plants, exhaust plants as well as special industrial installations.
    All LAXMI AXIAL Flow fans have cast aluminium alloy impelle....





    Engineering Products Catalog

    Flow


    AXIAL FLOW FANS [Bangalore]
    Humidification FansM
    Wall Mounted Exhaust Fans
    Roof Extractors
    Mine/Tunnel Ventilation Fans ....




    FLOW TABLE [Mumbai]
    AS PER IS: 6932 (Part VIII) This is used for determining the workability of building limes.....




    FLOW TABLE (MOTORISED) [Mumbai]
    AS PER IS: 1199, ASTM C - 124, AASHO T - 120....




    FLOW TABLE [Mumbai]
    This is used for measuring the consistency of Pozzolanas and also cement mortar and hydrated lime.....




    Sight Glass & Sight Flow Indicator [Ahmedabad]
    Brightech manufacture a wide range of Sight Glass & Sight Flow Indicator for the General & Special purpose for the usage in the process Industries. The General types are tube type, Full view & Special types are made in models such as Plain type, Drip type, Flapper type, Rotating type & Angle type. Borosilicate Toughened Glasses are Thermal Shock Tested & Stress relived to undertake piping strains ....




    Axial Flow Fans [Mumbai]
    Through AXIAL FLOW FANS the air or gas flows parallel to the impeller axis i.e. the suction and the discharge are in the same line. LAXMI Axial Flow Fans cover a wide range of air quantities and pressures and are suitable for common ventilation and air conditioining plants, exhaust plants as well as special industrial installations. All LAXMI AXIAL Flow fans have cast aluminium alloy impellers w....




    Standard Axial Flow Fans [Mumbai]
    Cast aluminium impeller is directly mounted on the motor shaft in a casing of sheet welded construction with flat iron flanges.....





      0   1 .... Next Page >>