Product Details
Hydraulic Press Brakes
Delhi
A Quality Product from
Santec Hydrofluid Engineers [View Profile]
Delhi - India
Description :
"SANTEC' presents to you a range of most technically advanced hydraulic press brakes with all latest features as per international standards.
Power Pack Unit:
The low noise Hydraulic system is designed as per international practices and assembled with internationally reputed make components.
Valves are mounted on a specially designed compact manifold block minimising pipings and chances of leakages. The large sized oil reservoir provides adequate cooling.
Imported sealing kit prevents scratching of bore in case of seal failure and backup seal offers additional sealing enabling to use machine for sometime at a little pressure drop while awaiting seal replacement, thus avoiding downtime.
Structure:
The all steel structure of SANTEC Press Brakes consist of side frames, ram, I-Beam type table and pair of levers manufactured from ultrasonically tested steel plates. All sections are designed to give minimum deflections and maximum rigidity as per international standards. Pair of hydraulic cylinders are synchronised by a heavy duty torque tube welded to the levers. This offers absolute parallelism between them and table working surfaces.
Other Important Features :
? Repetitive accuracy is with in ? 0.04 mm
? International Quality heydraulic valves rated at 310 bar but working pressure is less than 160bar, this ensure trouble free operation.
? Adjustable five piece guides, provided with special non metallic liners for long life.
? Quick adjustable stroke length.
? Front operated back gauge with micro setting arrangement.
? Raw tilting arrangements to maintain bendig accuracy over a period.
? Moving work station with on / off buttons, selector switches foe inch, single cycle & auto cycle & emergancy stop buttons for easy operation & better saftey.
? Rear Cylinder design using mechanical advantage through lever, reduces the cylinder size which enable to use medium pressure hydraulic component & also improves stroke accuracy.
? Fast approach & fast return speed for reducing cycle time, slow pressing speed for better stroke control & bend accuracy.
Operations:
Santec Press Brakes have three operational modes for operators greater convenience and least fatigue which can be selected from the panel door mounted selector switch.
Inch cycle : This mode is used for setting bed angle depth stroke. The ram movement (up down) can be controlled at any described position from foot switches.
Autocycles : The cycle (Approach-Pressing-Return) is continuously repeated once this cycle is selected. This mode is useful for continuous repetitive work where stroke length can be adjusted to suit the job and the operators speed and rhythm.
| View Complete Catalog | Send Online Enquiry | View Company Profile |
Other Matching Products
'Trimans' NC HYDRAULIC PRESS BRAKES
-Capacity : 60 MT to 500 MT -Length : 2500 mm to 4000 mm fitted with 2 axes NC Controller -Equipped with European Controller and Drives -Offers better economy even for multip ....
Hydraulic Press Brakes
"SANTEC' presents to you a range of most technically advanced hydraulic press brakes with all latest features as per international standards. Power Pack Unit: The low noise ....
PILLER TYPE HYDRAULIC PRESS
These are steam or electrically heated hydraulic presses with a close frame construction and it can withstand desired pressure. ....
HYDRAULIC PRESS
Lower body of mild steel with a steel bush completely enclosed in the centre accomodating the ram. This ensures better protection to lower body. Tested upto the pressure of 4000 ....
HYDRAULIC PRESS
It is Close Frame Contruction, Rigid & does not deflect. It has efficient performances & is well desinged for Strength, Stability & Rigidity. It can withstand desired pressure. Ram ....
HIGH SPEED HYDRAULIC TRIMMING PRESS
High Speed Hydraulic Trimming Press. ....
OIL HYDRAULIC PRESS FOR PAVER
Oil Tank Capacity : 60 Ltr.
Body : M.S. Steel Body
Hydraulic Stand : For removing ring
Production Capacity : 1000 to 2000 Nos., H.P. 5, 3 Phase ....
OIL HYDRAULIC PRESS WITH POWER PACK
Oil Tank Capacity : 40 liters 5 HP
Production Capacity : 1000 to 2000 Nos.
Tiles Size : 300mm x 300mm
....
Hydraulic Press Brake
Delem CNC system[made in Holand]. Adopting reliable electro-hydraulic proportional servo synchronization. Ram stroke and back gauge are controlled by controller. ....
Hydraulic Twin Container Baling Press
Hydraulic Twin Container Baling Press For Waste Paper or Paper waste. ....
Santec Hydrofluid Engineers deals in :
Exporters of material handling equipments like :- OUR PRODUCT RANGE -Hydraulic Presses -Swaging Machines -Compression Molding Presses -Rubber Machinery -Scrap Baling Presses -Vacuum Moulding Presses -Hydraulic Press Brakes -Hydraulic Shearing Machines -Hydraulic Cylinders/Jacks -Large Platens Hydraulic Presses -Transfer & Injection Molding Presses -Plastic Injection Moulding Machines -Deep Drawing Presses -SMC Moulding Presses
| View Company Profile | View Complete Catalog | Send Online Enquiry |